Prepmart | JKSSB | JKPSCCivil Engineering MCQs

1 The principle of "working from whole to part" is used in surveying because

2 The relation between the radius (R) and degree (D) of a curve is

J.E Civil 2023

Civil Engineering

Question info: View question

3 A stone is thrown vertically upwards with a vertical velocity of 98 m/sec. It returns to the ground in

J.E Civil 2023

Civil Engineering

Question info: View question

4

J.E Civil 2023

Civil Engineering

Question info: View question

5
Which of the following option is true about the moment of inertia of a section?
i) The unit of moment of an area does not depends upon the units of its area.
ii) The moment of inertia of an area may be obtained by the methods of integration.
iii) The Routh`s rule is used in finding out the moment of a body which is unsymmetrical about three mutually perpendicular axes.
The true option is

J.E Civil 2023

Civil Engineering

Question info: View question

6 The state of pure shear stress is produced by

J.E Civil 2023

Civil Engineering

Question info: View question

7 At the time of designing a 40 m length chimney with one end is fixed, effective length is considered as

J.E Civil 2023

Civil Engineering

Question info: View question

8 Consider full flow occurring through the circular water pipe system as shown in figure, Determine the velocity, V (in m/s) in the branch pipe `R`.

J.E Civil 2023

Civil Engineering

Question info: View question

9 A simply supported beam AB has the bending moment diagram as shown in the following figure. The beam is possibly under the action following loads:

J.E Civil 2023

Civil Engineering

Question info: View question

10 Find the centroid of laminae shown in figure

J.E Civil 2023

Civil Engineering

Question info: View question

Your Progress

MCQs for topic: Civil Engineering

1 The principle of "working from whole to part" is used in surveying because

2 The relation between the radius (R) and degree (D) of a curve is

3 A stone is thrown vertically upwards with a vertical velocity of 98 m/sec. It returns to the ground in

4

6 The state of pure shear stress is produced by

7 At the time of designing a 40 m length chimney with one end is fixed, effective length is considered as

8 Consider full flow occurring through the circular water pipe system as shown in figure, Determine the velocity, V (in m/s) in the branch pipe `R`.

9 A simply supported beam AB has the bending moment diagram as shown in the following figure. The beam is possibly under the action following loads:

10 Find the centroid of laminae shown in figure

Report an error